Chief KTA220B Instrukcja Instalacji

Przeglądaj online lub pobierz Instrukcja Instalacji dla Akcesoria do montażu na ścianie i suficie Chief KTA220B. Chief KTA325B Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 8
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
INSTALLATION INSTRUCTIONS
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE 700
SAVAGE, MINNESOTA 55378 USA
8832-000141 Rev E
©2008 Chief Manufacturing
www.chiefmfg.com
11/08
BEFORE YOU BEGIN
Horizontal Array Pole Clamp
Models: KTA-220/225 and KTA-320/325
The KTA-220/225 and KTA-320/325 pivot arrays allow
horizontal (yaw), vertical (pitch), and roll display
adjustment. The pitch adjustment range is 30° (15° up /
15° down).
The KTA is designed to mount two or three 17" displays.
The KTA accommodates standard VESA® 75mm/100mm
compliant displays.
KTA-220/225
KTA-320/325
CAUTION: To prevent damage to your display, which could affect or void the Factory warranty, thoroughly study all
instructions and illustrations before you begin to install the mount. Pay particular attention to the "Important Warnings
and Cautions" on Page 2.
CAUTION: The combined weight of the displays installed must not exceed 70 lbs (31.8 kg) for the KTA-220 and
KTA-225 and 90lbs (40.8 kg) for the KTA-320 and KTA-325, the maximum load capacity of the mounts. The weight of
each individual display must not exceed 35 lbs (15.9 kg) for the KTA-220 and KTA-225 or 30 lbs (13.6 kg) for the
KTA-320 and KTA-325.
Przeglądanie stron 0
1 2 3 4 5 6 7 8

Podsumowanie treści

Strona 1 - Horizontal Array Pole Clamp

INSTALLATION INSTRUCTIONSCHIEF MANUFACTURING INC.1-800-582-6480 952-894-6280 FAX 952-894-69188401 EAGLE CREEK PARKWAY, STE 700SAVAGE, MINNESOTA 5537

Strona 2

Models: KTA-220/225 and KTA-320/325 Installation Instructions2• IMPORTANT WARNINGS AND CAUTIONS! WARNING: A WARNING alerts you to the possibility of

Strona 3

Installation Instructions Models: KTA-220/225 and KTA-320/3253TOOLS REQUIRED FOR INSTALLATION• Phillips screwdriver•3/16" Hex Key•5/32" Hex

Strona 4 - INSTALLATION

Models: KTA-220/225 and KTA-320/325 Installation Instructions4INSTALLATION1. Assemble pole clamp back (90) to pole mount front using two FW (110) and

Strona 5 - Spacer (60 or 70)

Installation Instructions Models: KTA-220/225 and KTA-320/3255Attach Centris Head to Recessed Mount DisplayCAUTION: If display uses a screw size oth

Strona 6 - Display Adjustment

Models: KTA-220/225 and KTA-320/325 Installation Instructions6Figure 10: Install End Lock(s)Display AdjustmentThese pivot arrays allow horizontal, p

Strona 7

Installation Instructions Models: KTA-220/225 and KTA-320/3257

Strona 8

Models: KTA-220/225 and KTA-320/325 Installation Instructions8

Komentarze do niniejszej Instrukcji

Brak uwag